🔩Common Components

Here you can find the different components I use for my projects and setup


USB Stuff

  • USB-PD Trigger Boards

  • 5V Trigger Board - https://u.cray.io/5v-trigger-board [Amazon]

    This board can accommodate other voltages but I only use it for 5V since you need to bridge pads to get the voltage you want. Bridge the following pads to get 5V (and of course verify with multimeter):

  • 9V, 12V, 15V, 20V Trigger Boards - https://u.cray.io/pd-trigger-boards [Amazon]

    I prefer these boards when I need something other than 5V as they work out of the box

USB-C Connectors

USB-C Power Meter

USB-PD Power Supplies

USB-C Cables

  • Anker Cables - https://u.cray.io/usb-c-cable-anker [Amazon]

    All around great cables - really can't go wrong with these.

  • AUFU Magnentic USB Cables - https://u.cray.io/usb-c-cable-aufu [AliExpress]

    These cables are awesome and allow you to quickly attach and detach to your devices. They support USB-C, MicroUSB, and Lightning connector. You can purchase additional inserts to support several devices. I've started using these everywhere.


Electronics Stuff

Buck Converters

PCB Prototype Board

Pin Headers


Screws & Stuff

Last updated